Cemented Tungsten Carbide Flat Bar

• Customization: Available
• Product Type: Strip
• Material: Cemented Carbide
• Model NO.: carbide bar
• Carbon Content: Low Carbon
• PCD: 89hra 90.5hra 91.0hra
• Transport Package: First Into Paper Box, Then Into Carton or Wooden
• Specification: 330MM 450MM
• Trademark: UBT
• Origin: Zhuzhou
• Production Capacity: 40tons/Month

Product Description

Tungsten carbide strip are usually used for general wood cutters / hard wood cutters ,plastic and tobacco cutting . and meet the ISO9001:2008 quanlity standard. We can make the shipment in the shortest delivery time wtih the compeititve price than any other factory.

  We can manufacture various cemented carbide stipes and plate as per customer's requirments based on the differente markets. Our main products include :Cemented carbide drills, cutting cutters, mining tools, drawing dies ,carbide stripes ,rods etc.

Skillful workers and advanced euquipments can make every of your size possible.

Different grade are available too.

We take great efforts to increase commodity types rather than quantitiy to promote the flexibility of competing in the worldmarket. Above all , our client;s demands are always the first to be considered.


Grade of our carbide strips
 

ZZBT Grade	ISO Grade	Density (g/cm^3)	Hardness (HRA)	T.R.S                (MPα)	Grain Size	Performance & Application Recommended
UBT910	K20	14.6-15.0	90~90.5	2200~2400	Medium	High hardness, suitable for roughing of iron, solid wood, dry wood or nonferrous metal, ceramic and other alloys.
UBT40S	K25	14.6-15.0	90~90.5	2600~2800	Fine	High toughness, easy to be brazed without heat preservation. Suitable for rosewood, solid wood, pinewood, and other wood with a lot stammer.
UBT920	K10~K15	14.6-15.0	91~91.8	2400~2600	Fine	Good versatility, suitable for kinds of solid wood, rosewood, and MDF.
UBT15T	K10~K15	14.6-15.0	92.5~93	2000~2200	Ultrafine	High hardness, suitable for finishing of iron, nonferrous metal, ceramic and other alloying, semifinishing of of hardwood, chipboard, MDF and HDF. Heat preservation is necessary when brazing.
UBT10T	K10	14.6-15.0	92.5~93	1800-2000	Ultrafine	High hardness, suitable for finishing of iron, nonferrous metal, ceramic and other alloying, semifinishing of of hardwood, chipboard, MDF and HDF. Better to use silver soldering.
UBT10C	K40	13.8-14.2	87.5~88	2800~3000	Coarse	High toughness, difficult to break tooth. Special used for finger jointing tool.

Standard sizes of our carbide strips
 

Type	T*W*L (mm)	T (mm)	W (mm)	L (mm)
FS05	T x 5 x 320	2.0~15.0	5	320
FS06	T x 6 x 320	2.0~15.0	6	320
FS07	T x 7 x 320	2.0~15.0	7	320
FS08	T x 8 x 320	2.0~15.0	8	320
FS09	T x 9 x 320	2.0~15.0	9	320
FS10	T x 10 x 320	2.0~15.0	10	320
FS11	T x 11 x 320	2.0~15.0	11	320
FS12	T x 12 x 320	2.0~15.0	12	320
FS13	T x 13 x 320	2.0~15.0	13	320
FS14	T x 14 x 320	2.0~15.0	14	320
FS15	T x 15 x 320	2.0~15.0	15	320
FS16	T x 16 x 320	2.0~15.0	16	320
FS17	T x 17 x 320	2.0~15.0	17	320
FS18	T x 18 x 320	2.0~15.0	18	320
FS19	T x 19 x 320	2.0~15.0	19	320
FS20	T x 20 x 320	2.0~15.0	20	320
FS22	T x 22 x 320	2.0~15.0	22	320
FS25	T x 25 x 320	2.0~15.0	25	320
FS28	T x 28 x 320	2.0~15.0	28	320
FS30	T x 30 x 320	2.0~15.0	30	320
FS32	T x 32 x 320	2.0~15.0	32	320
FS35	T x 35 x 320	2.0~15.0	35	320
FS40	T x 40 x 320	2.0~15.0	40	320
FS45	T x 45 x 320	2.0~15.0	45	320
FS50	T x 50 x 320	2.0~15.0	50	320
FS55	T x 55 x 320	2.0~15.0	55	320