Titanium Carbonitride Based Cermets

• Product Type: Tools and Hardware
• Material: Cermets
• Chemical Compsition: Tic, Tin, Ti( C,N), Ni, Mo, Co
• Hardness: 90.8~ 93.3
• Denstity: 6.0~ 6.7g/cm3
• MPa: 1980~ 460
• Shape: Round, Trangle, Square, Bars and Special
• Useness: Cutting Tools, Wear Resistance Parts
• Trademark: ubt
• Origin: Hunan, China
• HS Code: 8209101900
• Production Capacity: 100000 PCS a Month

Product Description

Cermet is a kind of hard alloy matertial , which manufactured through powder metallurgic process based on TiC, TiN or Ti( C, N) as hard phase, and Ni, Co and Mo as binder. The name CERMET COMBINES THE WORDS CERAMIC AND METAL. In comparision to Tungsten cemented carbide, Cermet has improved wear resistance, chemical stability, thermal stability and lower density. But on the other hand, it also has lower compressive strength and toughness. Therefore, the cermet is very suitable for making metal cutting tools, especially for finishing and semi-finishing tools, as well as various wear resistance, corrosion-resistance and heat-resistance parts such as ball valve, flange, small bearing metal, bearing seeves, nozzles and seal-ring etc.

As cutting tools, the advantage of cermet is inferior affinity with the work piece and extreme low wear coefficient, so cermet grades are preferably used inhigh speed finishing and semi-finishing of carbon steel, alloy steel, stainless steel and c ast iron, where crater wear and built-up edge are problems. It enables a long tool life, close tolerances and beautiful cutting surfaces.

Grades	ISO class	Hardness HRA	Density g/cm3	TRS Mpa	Toughness MPa/m
BTC10	P01-P05	93.3	6.4	1980	7.7
BTC10A	P01-P05	92.8	6.8	2065	8.1
BTT15	P10-P15	91.7	6.5	2210	8.8
BT20A	P20-P30	90.8	6	2460	10.1

We can develop and produce various rods, tubes, plates and wear parts of cermet to meet different application requirements.